Sealtite Building Fasteners

Accessories

Rivets	• Open-end blind rivets are designed to attach 2 thin pieces of metal for a low profile appearance. • Applications include metal roofing ridge-caps, roof gutters & downspouts. • 304 Stainless Steel, Carbon Steel, & Aluminum are available. • Painted #43 Stainless are available to match most architectural panel colors.

Polyurethane Universal Closure Strips	• Polyurethane foam strips are also referred to as Universal Closures. • The material is a flexible semi-closed cell material that is used for filling voids & other openings between metal panels. • They are available with or without pre-applied adhesive. • Standard length is 25'.

ROOFJACK	• Manufactured from EPDM or silicone rubber, ROOFJACK are compounded for maximum resistance to ozone, UV light, & temperature extremes. • Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation. • ROOFJACK are well marked so they can easily be cut with shears to fit exactly the pipe size used. • Retrofit ROOFJACK are used in applications for which a standard flashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection. • ROOFJACK are available in Black or Gray EPDM, either square base or round base. • Red Silicone ROOFJACK are available in a square base only.

Retrofit ROOFJACK

MULTIVENT™	• Adhesive is applied to the flat of the foam strip for easy field installation. • Open cell foam formulated to allow as much as 98% free air flow. • Material design prevents wind-driven rain from penetrating the material causing undesired leaks. • Material design is universal in nature. It will conform to any panel 1 1/4 or less in height. • MultiVent™ can be used on angled roof applications. There is no need for special angle cut closures.

CLOSURE STRIPS	• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel configurations. • Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building). • 1.5 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays. • Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened. • Interlocking dovetails provide a secure end-to-end fit, eliminating any potential gaps. • Other profiles are available. Call SEALTITE Customer Service for availability.

Grommet	• Grommet consists of 304 Stainless Steel machine screw, 304 Stainless Steel bonded washer, & internally threaded rubber sleeve with pre-assembled nut. • As the fastener is tightened, the rubber sleeve expands to provide a gasketing effect on the bottom side of the pre-drilled hole. • Applications include fastening fiberglass sheets together or other dissimilar materials that are prone to extensive expansion & contraction due to temperature changes. • 316 Series Stainless Steel is available as an option.

Wedge Anchor	• Wedge anchors are carbon steel with zinc plating. • Applications include attaching base angle to concrete as well as other equipment subject to vibration or extreme movement. • The hole diameter drilled with a carbide masonry bit is equal to the diameter of the anchor installed • Expansion cone provides full 360 degree contact with the concrete, allowing maximum pull out strength.

TACKY TAPE / URETHANE & ACRYLIC TUBES	• TACKY TAPE is a 100% solids, asbestos free butyl tape sealant in roll form. • Applications include metal roof endlaps, sidelaps, vents, gutters, pipe flashings, skylights. • Service temperature range is -40 Degrees F- +180 Degrees F. •Material will not become brittle or crack. • Tube sealants are designed for a wide variety of substrates including steel, aluminum, concrete & wood. • Urethane is designed to seal horizontal construction joints that are subject to structural movement. • Urethane can withstand prolonged water immersion. • Urethane is available in various colors to match substrates. • Acrylic is a multipurpose sealant designed for exterior applications such as skylights or window frames. It is available in several colors.

EMSEAL AST/MST ACRYLIC SEALANT TAPE	• AST is a self-adhering foam tape impregnated with water-based acrylic-modified asphalt emulsion. • It is an excellent alternative to butyl tape & open-cell polyurethane foam strips. • Will not dry out and become hard and brittle • UV-stable • Highly resistant to bugs and vermin • Will not extrude from between joints like caulk or butyl tapes • Conforms to contours and fills gaps • Maintains a seal during thermal expansion and contraction of building panels • Excellent compressibility and recovery (minimal compression set) • Good thermal and sound insulator • No shrinkage or blow-out due to closed-cell breakage • Supplied with self-adhesive on one side. After removal of packaging, material begins gradual expansion - more slowly in cold weather than in hot. • MST is a resilient cellular foam infused with a hydrophobic (water resistant) modified acrylic liquid adhesive sealant. Go to www.sealtite.com for MST technical information.

MAGNETIC AND NON MAGNETIC SPRING RETAINER SOCKETS AND DRIVERS	• 1/4", 5/16", 3/8" sizes are standard. • Magnetic or Spring Retainer are both available • Magnetic socket is designed with a high power magnet for a secure fit. Painted fasteners do not scratch or mar as easily • Spring retainer socket is designed for use with all SEALTITE non-magnetic screws, especially the ZXL long-life family. The clip & ball bearing hold the screw securely in place during installation.