 |
STANDARD & SILICONE ROOFJACK
Manufactured from EPDM or silicone rubber, ROOFJACK are compounded for maximum resistance to ozone, UV light, & temperature extremes.
Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation
ROOFJACK are well marked so they can easily be cut with shears to fit exactly the pipe size used.
Retrofit ROOFJACK are used in applications for which a standard flashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.
ROOFJACK are available in Black or Gray EPDM, either square base or round base.
Red Silicone ROOFJACK are available in a square base only.
|
|
ROUND, SQUARE AND SILICONE
|
|
COLOR |
CARTON QTY. |
WEIGHT PER CARTON |
|
|
BLACK, GRAY AND RED SILICONE
|
|
2.5 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
4.5 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
7.5 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
8.0 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
9.5 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
12.0 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
15.5 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
12.8 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
19.3 |
|
|
BLACK, GRAY AND RED SILICONE
|
|
25.6 |
|
|
EPDM 500 |
|
Advanced Ozone Resistance Tested to...
|
|
|
High Temperature Resistance
Tested To: Intermittent
Continuous
|
+135C (+275F)
+100C (+212F)
|
+135C (+275F)
+100C (+212F)
|
Low Temperature Resistance tested to... |
|
-74C (-100F) |
Tensile Set Maximum... |
|
5MPa (700psi)
50%
|
|
| * Complete specifications data and testing methods are available upon request. |
|
|
