Sealtite Building Fasteners

• Truss Head with 6-lobe recess driver provides an aesthetic, low-profile appearance on sidewall metal applications installed into metal girts.

• Self-drilling point penetrates steel thickness up to .210".

• Undercut EPDM rubber washer provides a secure seal even when driven at an angle.

• T-30W driver is designed to fit securely into the 6-lobe recess to prevent bit "cam-out."

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
12-14 X 3/4"	TRUSS	2500	10.7
12-14 X 1-1/4"	TRUSS	2500	14.1
1/4"- 14" X 7/8" STITCH	TRUSS	2500	13.0

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIAMETER	WASHER FACE DIAMETER	HEAD ACROSS FLATS	ULT. TENSILE STRENGTH	MINIMAL TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
#12 ECLIPSE	.180/.175	.215/.209	.164/.157	.544 T-30 6-LOBE TRUSS	.305/.311	2900 LBS.	92 IN-LBS.	1962 LBS.
1/4" STITCH	.156/.150	.246/.240	.192/.185	.544 T-30 6-LOBE TRUSS	.305/.311	3800 LBS.	150 IN-LBS.	2850 LBS.

	MATERIAL
	HRS PRIME ONLY			A-55 GALVALUME			G-90 GALVANIZED
NOM. GAUGE	16	14	12	26	24	22	20	18	16	14	12
THICKNESS	.065	.070	.106	.019	.024	.032	.038	.047	.060	.072	.101
#12 ECLIPSE	927	958	1678					729	787	1041	1372
1/4" STITCH				342	378	418	620	1038

DESIGNATION	MATERIAL
DESIGNATION	AZ55 GALVALUME
NOM. GAUGE	29	26	24	22
THICKNESS	.015	.019	.024	.032
#12 ECLIPSE	687	1090	1299	1562
1/4" STITCH	746	960	1261	1376

NOTES: 1. HRS* (Hot Rolled Steel) 2. Pullover values calculated with EPDM rubber washer assembled to cupped head screw with .544 washer face. 3. All strength values shown are ultimate values, express in LBS. Apply an appropriate safety factor to obtain design limits.

Steelbinder Eclipse Application

T-30 DRIVER
T-30 DRIVER	Drill point is designed to penetrate steel quickly with no "point walking"	The Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.