Steelbinder Heavy Gauge

STEELBINDER HEAVY GAUGE

Fastener lengths over 1-1/4are designed to penetrate steel thickness up to .500. 12-24 x 7/8 is designed to drill up to .250.

Thread to point ratio engineered to provide maximum pullout strength in heavy gauge steel.

EPDM rubber is vulcanized to steel washer. Moisture has no place to penetrate. The washer provides a secure seal even when driven at an angle.

Applications include metal deck to structural steel or bar joists, & retrofit clips to structural steel.

Fastener is also available without a bonded sealing washer.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
12-24 X 7/8"	HWH	2500	12.0
12-24 X 1-1/4"	HWH	2500	12.6
12-24 X 1-1/2"	HWH	2000	16.2
12-24 X 2"	HWH	1500	22.1
12-24 X 3"	HWH	1000	29.5
12-24 X 4"	HWH	500	36.0
12-24 X 5"	HWH	500	43.6
12-24 X 6"	HWH	500	51.9

TECHNICAL INFORMATION	MAJOR DIAMETER	MINOR DIAMETER	WASHER FACE DIAMETER	HEAD ACROSS FLATS	NOM. TENSILE STRENGTH	MINIMAL TENSILE STRENGTH	NOMINAL SHEAR STRENGTH
#12-24 HEAVY GAUGE	.215/.209	.164 REF.	.550 (14mm)	.311/.305	2803 LBS.	100 IN-LBS.	1999 LBS.

	MATERIAL
	HRS PRIMED ONLY
NOM. GAUGE	14	12	3/16"	1/4"
THICKNESS	.070	.106	.187	.250
#12-24 HEAVY GAUGE	961	1627	2556	3298

DESIGNATION	MATERIAL
DESIGNATION	AZ55 GALVALUME
NOM. GAUGE	26	24	22
THICKNESS	.019	.024	.032
#12-24 HEAVY GAUGE	801	996	1258

NOTES:
1. HRS (Hot Rolled Steel)
2. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.

Steelbinder Heavy Gauge Application

Long Drill point assures proper clearance of heavy gauge metal before any thread engagement begins	HWH with EPDM bonded washer provides a secure seal to prevent leaks.