HWH Steelbinder

HWH STEELBINDER

Self-drilling screws that are designed for general construction applications.

Drill points are designed to penetrate a wide variety of metal thicknesses from thin sheet meal to 0.250.

Applications include HVAC, roof deck to steel framing, and roof clips to steel framing.

#10 and #14 HWH are available with or without a bonded sealing washer. The #12 HWH is available only without a sealing washer. The #12 MAXX cupped head is available for applications requiring a washer.

Mechanical zinc plating provides superior corrosion protection versus thinner electro-zinc plating.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
10-16 X 1/2"	5/16" HWH	10000	5.0
10-16 X 5/8"	5/16" HWH	10000	5.7
10-16 X 3/4"	5/16" HWH	5000	6.3
10-16 X 1"	5/16" HWH	5000	7.6
12-14 X 3/4"	5/16" HWH	2500	8.4
12-14 X 1"	5/16" HWH	2500	10.0
12-14 X 1 1/4"	5/16" HWH	2500	11.8
12-14 X 1 1/2"	5/16" HWH	2500	13.3
12-14 X 2"	5/16" HWH	2000	16.7
12-14 X 2 1/2	5/16" HWH	1500	21.4
12-14 X 3"	5/16" HWH	1000	25.0
12-14 X 4"	5/16" HWH	500	30.3
14-14 X 3/4"	3/8" HWH	2500	12.5
1/4-14 X 1"	3/8" HWH	2500	15.2
1/4-14 X 1 1/4"	3/8" HWH	2000	17.5
1/4-14 X 1 1/2"	3/8" HWH	2500	19.6
1/4-14 X 2"	3/8" HWH	1500	23.8
1/4-14 X 2 1/2"	3/8" HWH	1500	30.0
1/4-14 X 3"	3/8" HWH	1000	33.2
1/4-14 X 4"	3/8" HWH	500	41.9
1/4-14 X 5"	3/8" HWH	500	50.7
1/4-14 X 6"	3/8" HWH	500	53.0

TECHNICAL INFORMATION	DRILL POINT	MAJOR DIAMETER	MINOR DIAMETER	WASHER FACE DIAMETER	HEAD ACROSS FLATS	NOM. TENSILE STRENGTH	MINIMAL TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
#10	2	.189/.183	.141/.135	.432/.398	.311/.305	1936 LBS.	61 IN-LBS.	1400 LBS.
#12	2.5	.215/.240	.164/.157	.432/.398	.311/.305	2900 LBS.	92 IN-LBS.	1962 LBS.
1/4"	3	.246/.240	.192/.185	.520/.480	.374/.367	3697 LBS.	150 IN-LBS	2662 LBS.

	MATERIAL
	HRS PRIME ONLY			G-90 GALVANIZED
NOM. GAUGE	16	14	12	18	16	14	12	22
THICKNESS	.065	.070	.106	.047	.060	.072	.101	.031
#10	818	882	1495	731
#12	927	958	1678	729	787	1041	418
1/4"	986	1070	2003	868	890	1107	1327	489

DESIGNATION	MATERIAL
DESIGNATION	AZ55 GALVALUME
NOM. GAUGE	26	24	22	20
THICKNESS	.019	.024	.032	.038
#12 No Washer	722	1040	1197	1419
1/4" X 16mm(.62") Bonded Washer	1001	1206	1649
1/4" No Washer	678	1160	1503

NOTES: 1.*HRS (Hot Rolled Steel) 2. All values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.