left nav

 

WOODBINDER ACQ

Carbon steel drill point welded to 304 Stainless Steel shank allows fastener to self-drill in metal.

Woodbinder ACQ is the best choice for use with ACQ (Alkaline Copper Quaternary) treated lumber most commonly used for skirt board applications (also known as splash board).

Lifetime protection against red rust is backed by a written warranty on the entire fastener.

EPDM rubber is vulcanized to 304 Stainless Steel washers to form an excellent seal.

 
SIZE
HEAD STYLE
CARTON QTY.
WEIGHT/M
9 X 1"
1/4" CHWH
3000
8.5

TECHNICAL INFORMATION
POINT DIAMETER
MAJOR DIAMETER
MINOR DIAMETER
WASHER FACE DIA.
 HEAD ACROSS FLATS
NOM. TENSILE STRENGTH
MIN. TORSIONAL STRENGTH
NOMINAL SHEAR STRENGTH
30 SHARP
.180/.173
.129/.123
.500
.250/.244
1875 LBS.
50 IN-LBS
1210 LBS.

PULL OUT
STRENGTH VALUE
(LBS. ULT.)
SUBSTRATE
3/4" PLYWOOD
5/8" PLYWOOD
1/2" PLYWOOD
 7/16 OSB SOUTHERN YELLOW PINE
1" DEPTH
 FULL DEPTH
725
576
576
424
1117
N/A

PULL OVER STRENGTH VALUE
(LBS. ULT.)
Pullover values are calculated with .500 EPDM rubber washer assembled to 1/4" HWH. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.
 DESIGNATION MATERIAL
AZ55 GALVALUME
NOM. GAUGE 29 29
THICKNESS .019 .019
#9 X .500" Bonded Washer 579 654




Woodbinder ACQ application


Carbon Steel Hardened Point
304 Stainless Steel Body
 HWH with 304 Stainless Steel Bonded Washer provides an excellent seal to prevent leaks.

 
 

Home| New Customers | About Us | Privacy Statement | Site Map | Contact Us |
-Copyright © 2009 Sealtite Building Fasteners-