Clip Screws

#10 Diameter is designed to attach standing seam roof clips to plywood, OSB, or wood purlins.

A self-drilling Pancake Head is available to attach standing seam roof clips to steel framing.

Low profile head design provides excellent pullover strength.

Thin Wafer Head is designed for standing seam panels that utilize no clip but require a very thin head so as to not to dimple the roof panel.

Carbon Steel & 304 Stainless Steel Pancake Head are available.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
10 X 1"	#2 Phillips Pancake	5000	7.0
10 X 1-1/2"	#2 Phillips Pancake	2500	9.0
10 X 1" 304 Stainless	#2 Square Pancake	2000	7.0
10 X 1 1/2" 304 Stainless	#2 Square Pancake	2500	9.0
10 X 1"	#2 Phillips Wafer	5000	5.0
10 X 1 1/2"	#2 Phillips Wafer	2500	7.0
10 X 2"	#2 Phillips Wafer	2000	9.0
10 X 1"	#2 Square Pancake SD	5000	7.0
10 X 1 1/2"	#2 Square Pancake SD	2500	9.0

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIMETER	HEAD DIAMETER	NOM. TENSILE STRENGTH	MIN. TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
#10 PANCAKE	30 SHARP	.194/.188	.133/.126	.440	2140 LBS.	48 IN-LBS	1545 LBS.
#10-16 PANCAKE SD	.156/.151	.187/.183	.141/.135	.440	1981 LBS.	66 IN-LBS	1428 LBS.
#10 WAFER	30 SHARP	.204/.198	.128/.122	.450	1920 LBS.	61 IN-LBS	1633 LBS.

PULL OUT STRENGTH VALUE (LBS. ULT.)	SUBSTRATE
	HRS PRIMED ONLY			G-90 GALVANIZED	3/4 PLYWOOD	5/8 PLYWOOD	1/2 PLYWOOD
	16	14	12	18	3/4 PLYWOOD	5/8 PLYWOOD	1/2 PLYWOOD
#10 PANCAKE	N/A	N/A	N/A	N/A	N/A	656	274
#10-16 PANCAKE SD	818	882	1495	731	N/A	N/A	N/A
#10 WAFER	N/A	N/A	N/A	N/A	N/A	N/A	358

PULL OUT STRENGTH VALUE (LBS. ULT.)	SUBSTRATE
	SOUTHERN YELLOW PINE			SPRUCE PINE FIR		HEMLOCK-FIR
	1" DEPTH	FULL DEPTH	1" DEPTH	FULL DEPTH	1" DEPTH	FULL DEPTH
#10 PANCAKE	988	N/A	510	N/A	771	N/A
#10-16 PANCAKE SD	N/A	N/A	N/A	N/A	N/A	N/A
#10 WAFER	898	N/A	431	N/A	538	N/A

PULL OVER STRENGTH VALUE (LBS. ULT.)	DESIGNATION	MATERIAL
	DESIGNATION	AZ55 GALVALUME
	NOM. GAUGE	29	26	24	22
	THICKNESS	.015	.019	.024	.032
#10 PANCAKE		529	778	1128	1512
#10-16 PANCAKE SD		529	779	1128	1512
#10 WAFER		685	N/A	N/A	N/A

Clip Screws Application


	Type A point & thread design maximizes holding strength in plywood, OSB, & wood purlins.	304 Stainless Steel Sharp Point is available for high corrosion areas.