Sealtite Building Fasteners

• Round head with 6lobe recess driver provides an aesthetic, low-profile appearance on sidewall metal applications installed into wood girts.

• Type 17 drill point quickly penetrates steel siding and eliminates metal shaving that can embed themselves in the rubber washer.

• Undercut EPDM rubber washer provides a secure seal even when driven at an angle.

• T-25-W driver specially designed to fit securely in the 6-lobe recess with no cam-out or paint damage.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
10 X 1"	TRUSS	3000	8.0
10 X 1-1/2"	TRUSS	2500	10.1
10 X 2"	TRUSS	2000	12.2
10 X 2-1/2"	TRUSS	1500	15.4
10 X 3"	TRUSS	1000	17.2

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIAMETER	HEAD DIAMETER	ULT. TENSILE STRENGTH	MIN. TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
TECHNICAL INFORMATION	30 SHARP POINT	.206/200	.126/.122	.500	2023 LBS.	75 IN-LBS.	1653 LBS.

SUBSTRATE
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	2X YELLOW PINE	2 X SPRUCE PINE FIR	2X OAK
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	1" PENETRATION	1" PENETRATION	1" PENETRATION
716	515	398	306	1067	517	1467

PULL OVER STRENGTH VALUE (LBS. ULT.) Pullover values are calculated with EPDM rubber washer assembled to 6-lobe Truss head.	DESIGNATION	MATERIAL
	DESIGNATION	AZ55 GALVALUME
	NOM. GAUGE	29	26
	THICKNESS	.015	.019
#10 Eclipse Woodbinder® EPMD ONLY		688	879

Woodbinder Eclipse Application


The combination of the Sharp Point, Lead Thread & Type 17 point consistently drills 29 & 26 gauge hi-tensile steel with no "point walking."		The Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.