Sealtite Building Fasteners

• Fastener designed to attach steel roofing & siding used in post-frame & residential metal roofing applications.

• Threads transition from fine to coarse to generate superior holding strength in various wood substrates.

• Sharp Point & pronounced lead thread consistently drills high tensile 29 & 26 gauge steel with no "point walking."

• Type 17 point reduces metal shavings that can embed themselves in the rubber washer.

• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.

• Mechanical zinc plating provides superior corrosion resistance versus electro-plating under barrier coatings.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
10 X 1"	1/4" HWH	3000	8.0
10 X 1-1/2"	1/4" HWH	2500	10.1
10 X 2"	1/4" HWH	2000	12.2
10 X 2-1/2"	1/4" HWH	1500	15.4
10 X 3"	1/4" HWH	1000	17.2
12 X 3/4" STITCH	1/4" HWH	2500	8.8
12-14 X 3/4"	5/16" HWH	2500	12.7

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIAMETER	HEAD ACROSS FLATS	NOM. TENSILE STRENGTH	MIN. TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
TECHNICAL INFORMATION	30 Sharp Point Type 17	.210/.200	.130/.126	.247/.244	1904 LBS.	60 IN-LBS	1547 LBS.

SUBSTRATE
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	SOUTHERN YELLOW PINE		SPRUCE PINE FIR		OAK
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	1" DEPTH	FULL DEPTH	1" DEPTH	FULL DEPTH	1" DEPTH
707	590	400	310	1052	1552	492	1042	1894

PULL OVER STRENGTH VALUE (LBS. ULT.)	DESIGNATION	MATERIAL
	DESIGNATION	AZ55 GALVALUME
	NOM. GAUGE	29	26	24
	THICKNESS	.015	.019	.024
BONDED WASHER (.472" Dia.) 12mm)		378	629	721

NOTES: All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.

Kwikseal II Woodbinder Application


The combination of the Type 17 point & transition thread from fine to coarse generates superior drill speed in metal & holding strength in wood substrates.	Hex Washer Head with EPDM rubber washer provides a watertight seal on roof applications. Sealtite sockets are designed to allow for the added thickness of the powder coat.