left nav


WOODBINDER® SS

• 304 Stainless Steel cupped head & washer provide lifetime protection in the harshest environments. You may obtain a free copy of the written warranty upon request.

• 304 SS Woodbinder is an excellent choice for use in animal confinement applications or for aluminum liner panel applications.

• 304 SS Woodbinder is an economical alternative to Woodbinder ACQ.

• Type A point necessitates a pre-drilled hole in steel, but not aluminum.

ss

SIZE
HEAD STYLE
CARTON QTY.
WEIGHT/M
10 X 1"
1/4" CHWH
3000
7.9
10 X 1-1/2"
1/4" CHWH
2500
9.9
10 X 2"
1/4" CHWH
2000
12.0

TECHNICAL INFORMATION
POINT DIAMETER
MAJOR DIAMETER
MINOR DIAMETER
WASHER FACE DIA.
ULT. TENSILE STRENGTH
MIN. TORSIONAL STRENGTH
NOMINAL SHEAR STRENGTH
30 SHARP
.189/.183
.141/.139
.500
1135 LBS.
48 IN-LBS
1034 LBS.

PULL OUT
STRENGTH VALUE
(LBS. ULT.)

SUBSTRATE
3/4" PLYWOOD
1/2" PLYWOOD
7/16 OSB
1X4 PRESSURE TREATED S.Y.P. SOUTHERN YELLOW PINE SPRUCE PINE FIR
1" DEPTH
FULL DEPTH
1" DEPTH
633
415
390
785
918
1521
685

PULL OVER STRENGTH VALUE
(LBS. ULT.)

DESIGNATION MATERIAL
AZ55 GALVALUME
NOM. GAUGE 29 26
THICKNESS .015 .019
304 SS Type A (EPDM Only) 683 870



Applications

NOTES: All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.



Cupped head design captures the EPDM rubber washer to provide a secure seal even when driven at an angle. The Type A point will tap a predrilled hole in steel but will self-drill through aluminum liner panels.

 

 

 

Home| New Customers | About Us | Privacy Statement | Site Map | Contact Us |
-Copyright © 2010 Sealtite Building Fasteners
-