Woodbinder ST-XL

WOODBINDER ST-XL

Designed as an alternative to the zinc-aluminum alloy head. It is also used to attach steel roofing used in post-frame & residential construction. The smaller cupped HWH provides an attractive low-profile appearance versus larger HWH fasteners.

304 Stainless Steel cap provides lifetime warranty against red rust on the head & washer. You may obtain a free copy of the written warranty upon request.

ST-XL is an excellent choice for GALVALUME or other long-life metal roofs.

Type 17 milled point drills 29 & 26 gauges consistently & eliminates the metal shavings that can embed themselves in the EPDM rubber washer.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
9 X 1"	1/4" CHWH	3000	9.4
9 X 1-1/2"	1/4" CHWH	2500	11.0
9 X 2"	1/4" CHWH	2000	13.5
9 X 2-1/2"	1/4" CHWH	1500	16.0
9 X 3"	1/4" CHWH	1000	18.4
12 X 3/4" STITCH	1/4" CHWH	2500	16.0

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIAMETER	WASHER FACE DIA.	HEAD ACROSS FLATS	NOM. TENSILE STRENGTH	MIN. TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
TECHNICAL INFORMATION	30 TYPE 17	.181/.175	.133/.127	.500	.250/.244	2100 LBS.	60 IN-LBS.	1800 LBS.

SUBSTRATE
3/4" PLYWOOD	1/2" PLYWOOD	7/16 OSB	SOUTHERN YELLOW PINE
3/4" PLYWOOD	1/2" PLYWOOD	7/16 OSB	1" DEPTH	FULL DEPTH
667	395	239	1296	N/A

PULL OVER STRENGTH VALUE (LBS. ULT.) Pullover values calculated with EPDM rubber washer assembled to cupped head screw with .500 washer face. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.	DESIGNATION	MATERIAL
	DESIGNATION	AZ55 GALVALUME
	NOM. GAUGE	26
	THICKNESS	.019
#9 ST-XL Type 17 (EPDM Only)		726

Purlin ApplicationStitch Application

The Type-17 piercing point is fully threaded to the end and is designed for the quickest penetration through light gauge steel panels.	ST-XL has a 304 SS Cap on the head and washer. It will never red rust. Cupped head design provides low profile appearance.