Sealtite Building Fasteners

WOODBINDER® ZXL

• Designed to fasten steel roofing to wood purlins used in post-frame construction, & plywood or OSB used in residential construction.

• 5/16 cupped HWH with a molded ZAMAC 5 Zinc-Aluminum alloy provides lifetime protection against red rust on the head & washer. The ZAMAC 5 alloy provides more strength than more common ZAMAC 3 alloy. You may obtain a free copy of the written warranty upon request.

• ZXL is an excellent choice for GALVALUME & other long-life metal roof panels.

• Threads transition from fine to coarse to generate superior holding strength in various wood substrates.

• Sharp point with pronounced lead thread consistently drills high-tensile 29 & 26 gauge steel with no "point walking."

• Type 17 point reduces metal shavings that can embed themselves in the rubber washer.

SIZE	HEAD STYLE	CARTON QTY.	WEIGHT/M
10 X 1"	5/16" CHWH*	3000	7.9
10 X 1-1/2"	5/16" CHWH*	2500	9.9
10 X 2"	5/16" CHWH*	2000	12.0
10 X 2-1/2"	5/16" CHWH*	1500	16.0
10 X 3"	5/16" CHWH*	1000	20.0
12 X 3/4 STITCH	5/16" CHWH*	2500	9.0

*CHWH-CUPPED HEX WASHER HEAD

TECHNICAL INFORMATION	POINT DIAMETER	MAJOR DIAMETER	MINOR DIAMETER	WASHER FACE DIAMETER	HEAD ACROSS FLATS	ULT. TENSILE STRENGTH	MIN. TORSIONAL STRENGTH	NOMINAL SHEAR STRENGTH
TECHNICAL INFORMATION	30 SHARP Pt TYPE 17	.210/200	.130/.126	.500	.311/305	1585**LBS.	60 IN-LBS.	1574 LBS.

SUBSTRATE
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	2X YELLOW PINE		2X SPRUCE PINE FIR		2X OAK
3/4" PLY.	5/8" PLY.	1/2" PLY.	7/16 OSB	1"PENET.	FULL PENET	1"PENET.	FULL PENET.	1" PENET.
707	591	400	310	1052	1552	492	1042	1585**

NOTES: **Tabulated value is the force at which the ZXL head breaks from the carbon stell body.

PULL OVER STRENGTH VALUE (LBS. ULT.) Pullover values are calculated with EPDM rubber washer assembled to cupped head screw with .500 washer face. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.	DESIGNATION	MATERIAL
	DESIGNATION	AZ55 GALVALUME
	NOM. GAUGE	29	26	24	22
	THICKNESS	.015	.019	.024	.032
#10 ZXL Type 17 (EPDM Only)		658	927	1035	1386

Woodbinder ZXL Application

The combination of the Type 17 point & transition thread from fine to coarse generates superior drill speed in metal & holding strength in wood substrates.	The Zinc-Aluminum alloy HWH prevents red rust from ever starting. Sealtite spring retainer sockets are recommended. Sealtite sockets are designed to allow for the added thickness of the powder coat.	No Red-Rust Guaranteed!